Remote Monitor / Radio Trace Enable |
(Trunking System, Features) |
Enables the radio to decode a Remote Monitor or Radio Trace command
for the current Trunking System.
"Radio Trace"
applies
only for
System Type “Type II”. 
Also only
for a "Type II" System, and
applying to both "Remote Monitor" and "Radio Trace",
the radio keys-up for the time selected
by the Remote Monitor / Radio Trace Tx Base
Time.
|
For a "ASTRO 25" System Type, the in-the-field radio's transmit time is defined by a dispatcher and contained within the transmitted "Remote Monitor" command. |
|
When a Remote Monitor command has been received, the radio automatically keys-up and transmits surrounding audio from its "hot" microphone. This is especially useful in an emergency man-down situation. |
|
Remote Monitor is also known as "Radio Unit Monitor". |
|
When a Radio Trace command has been received, the radio automatically keys-up, sending unmodulated carrier, allowing a lost or stolen radio to be found. "Radio Trace" applies only for System Type “Type II”. |
|
For APX 7000XE and APX 6000, this feature applies only when System Option H43 is available to the radio. In addition, the radio requires firmware version R05.xx.xx or higher, and the APX CPS must be R05.xx.xx or higher. |
|
For APX 6500 this feature applies only when System Option G170 is available to the radio. In addition, the radio requires firmware version R05.xx.xx or higher, and the APX CPS must be R05.xx.xx or higher. |
